NEC Express5800/GT110b User's Guide download pdf (Page 76)

100

101

4-10 Configuring Your Server

Main

Option Parameter Description Your Setting

System Time HH:MM:SS Set the system time.

System Date MM/DD/YYYY Set the system date.

Hard Disk Pre-Delay [Disabled]

3 seconds

6 seconds

9 seconds

12 seconds

15 seconds

21 seconds

30 seconds

When accessing the IDE device

for the first time during POST,

the system waits for the

specified time until the device

becomes ready.

SATA Port 0

SATA Port 1

SATA Port 2

SATA Port 3

SATA Port 4

SATA Port 5

–

Shows the information on the

device connected to each

channel on the submenu. The

settings of some items may be

changed. However, leave the

items as they are at the

shipment.

Processor Settings –

Shows the processor settings

submenu.

Language [English (US)]

Français

Deutsch

Español

Italiano

Select which language BIOS

displays.

[ ]: Factory-set

IMPORTANT:

Check and adjust the system clock before the

operation if any of the following conditions is applicable.

 After carriage of device

 After storage of device

 After the device is entered into the pause state under the

environmental condition enduring device operation (temperature:

10°C - 35°C, humidity: 20% - 80%)

Check the system clock at the rough rate of once per month. When the

system clock is installed in a system requiring high time precision, it is

recommended to use a time server (NTP server).

If the system clock is remarkably delayed or advanced as the passage of

time in spite of adjustment, contact your service representative for

maintenance.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 493 494

Comments to this Manuals

No comments

NEC Express5800/GT110b User's Guide Page 76

Comments to this Manuals

Related products and manuals for Servers NEC Express5800/GT110b