Nec MT 1020G /820G User Manual download pdf (Page 24)

E – 24

Provides access to controls for your image and sound. Use the “Select” button on the projector

cabinet or (▲) (▼) buttons on your remote control to highlight the menu for the item you want to

adjust.

The volume, brightness, contrast, color, tint, sharpness and Image Mode controls are available for

Video or S-Video sources.

The volume, brightness, contrast, Image Mode, horizontal position, vertical position and auto picture

controls are available for RGB 1 or RGB 2 sources.

Volume

Use the “Adjust” (+) or (–) buttons to adjust the volume.

Brightness

Use the “Adjust” (+) or (–) buttons to adjust the brightness.

Contrast

Use the “Adjust” (+) or (–) buttons to adjust the contrast.

Color*

Use the “Adjust” (+) or (–) buttons to adjust the color.

Image Adjustment Menu

Enables you to select a video source such as a VCR, laser disk player, computer or document camera

depending on what is connected to your inputs. Press the "Select" button on the projector cabinet or

(▲) (▼) buttons on your remote control to highlight the menu for the item you want to adjust.

Video

Selects what is connected to your Video input-VCR, laser disk player or document camera.

S-Video

Selects what is connected to your S-Video input-VCR, or laser disk player.

RGB 1

Selects what is connected to your RGB 1 input —a computer. Use the "Adjust" (+) or (–) buttons to

select a standard* or one of six** custom settings you can create. Press the "Enter" button on the

cabinet or the "Left Click" button on the remote control to save your selection.

RGB 2

Selects what is connected to your RGB 2 input — a computer. Use the "Adjust" (+) or (–) buttons to

select a standard* or one of six** custom settings you can create. Press the “Enter” button on the

cabinet or the “Left Click” button on the remote control to save your selection.

Note on Custom Memory:

If a previously saved custom memory location is used with a new or different input signal it may not sync up,

producing a distorted image, or no image at all. If so, follow the instructions below:

1) Disconnect the signal cable so that there is no input signal. In this condition the on-screen message will be

displayed.

2) Select RGB1 standard or RGB2 standard from the source menu.

3) Connect the signal cable again.

NOTE:

* Standard is normally used and it can be user changed and automatically recalled.

** ”Custom 6” is read only. This feature is useful when an XGA image (10242768) is displayed with a

notebook computer supported by SXGA (128021024)and when an SVGA image (8002600) is displayed

with a notebook computer supported by XGA (10242768).

Menu Descriptions & Functions

Source Menu

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 37 38

Comments to this Manuals

No comments

Nec MT 1020G /820G User Manual Page 24

Comments to this Manuals

Related products and manuals for Projectors Nec MT 1020G /820G