NEC Express5800/R110f-1E User Manual download pdf (Page 85)

Using CacheCade

The CacheCade is the function to create the SSD Cache Drive using Solid State Drive(S) (SSD).

The SSD Cache Drive operates as the Cache of Logical Drive. SSD Cache Drive that improves access performance of the

Logical Drive.

 The function of creating SSD Cache Drive is available when the CacheCade function is

enabled.

 The function of Create and Delete SSD Cache Drive are not available with the RAID

Controller of which the CacheCade is disabled or is not supported.

Create SSD Cache Drive

This section describes the procedure of creating SSD Cache Drive by "Create SSD Cache Drive".

[Create SSD Cache Drive] is function of creating SSD Cache Drive by selected Solid State Drive. The SSD Cache

Drive is can create from one Solid State Drive.

 The function of Create SSD Cache Drive is available only in the Advanced mode. Make sure

that the RAID System management mode is Advanced mode.

 Be sure to use the same size and spec of solid state drives when you create SSD Cache

Drive with more than one solid state drives.

RAID Viewer

Step 1 Connect Solid State Drive(s) used for an SSD Cache Drive to the RAID Controller before starting [Create SSD

Cache Drive] if required. If the Solid State Drive(s) is connected completely, start the RAID Viewer.

Step 2 Click a RAID Controller on the Tree View. Click [Create SSD

Cache Drive] on the [Control] menu.

Step 3 The [Create SSD Cache Drive] dialog box

is started.

Select Solid State Drive(s) to be used to create the

SSD Cache Drive. If the different types of Solid State

Drives exist in the RAID Controller, select the

interface type to be used on [Type]. Next, check the

check boxes of Solid State Drive to be used on

[Physical Device]. You can select one or more Solid

State Drives.

After selecting Solid State Drive(s) properly, click

[Next].

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 134 135

No comments

NEC Express5800/R110f-1E User Manual Page 85