Refreshing the battery of the RAID Controller
The Refresh Battery is a function to refresh the battery connected to the RAID Controller. The function restores the
battery degraded due to charge and discharge.
Universal RAID Utility provides the function to manually execute the battery refreshing. The function can be done for
each RAID Controller.
You can use a Windows task scheduler to do a regular battery refreshing.
The Refresh Battery is not supported for some RAID Controllers. The menu of the Refresh
Battery does not appear if it is not supported. Also the "refresh" command of raidcmd is
failed.
Executing Refresh Battery Manually
The procedure of executing Refresh Battery is described below.
The manual Refresh Battery is available only in the Advanced Mode.
RAID Viewer
Step 1 Start the RAID Viewer. Click the battery on the Tree View. Then
click [Refresh Battery] on the [File] menu.
Step 2 The confirmation windows will open. Click [Yes] to execute the
battery refreshing. Click [No] to cancel the battery refreshing.
109
Comments to this Manuals