NEC Express5800/R110f-1E User Manual download pdf (Page 43)

Functions executable by RAID Controller

Menu item Description

[Create Logical Drive] Creates a Logical Drive in the selected RAID Controller.

[Create Logical Drive] has two modes, [Simple] and [Custom].

In the [Simple] mode, a Logical Drive can be simply created only by selecting a RAID

Level and Physical Devices.

In the [Custom] mode, a Logical Drive can be created by specifying detailed settings.

[Create SSD Cache Drive] Creates an SSD Cache Drive in the selected RAID Controller.

[Create SSD Cache Drive] is available only when CacheCade is enable.

[Silence Buzzer] Stops the Buzzer in the RAID Controller.

Functions executable for Battery

Menu item Description

[Refresh Battery] Executes Refresh for the selected Battery.

Functions executable for Logical Drive

Menu item Description

[Start Consistency Check] Executes Consistency Check for the selected Logical Drive.

[Start Initialize] Initializes the selected Logical Drive.

[Start Initialize] has two modes, [Full] and [Quick].

In the [Full] mode, initializes the entire area of a Logical Drive.

In the [Quick] mode, initializes only several leading blocks including the information on

managing a Logical Drive.

[Delete Logical Drive] Deletes the selected Logical Drive.

Functions executable for SSD Cache Drive

Menu item Description

[Delete SSD Cache Drive] Deletes the SSD Cache Drive.

[Delete SSD Cache Drive] is available when CacheCade is enable.

Functions executable for Physical Device

Menu item Description

[Start Rebuild] Rebuilds the selected Physical Device.

[Hot Spare] Makes a Hot Spare with the selected Physical Device or removes a Hot Spare.

[Make Global Hot Spare] makes Physical Devices be Global Hot Spares available as Hot

Spares of all Logical Drives in the relevant RAID System.

[Make Dedicated Hot Spare...] makes Physical Devices be Dedicated Hot Spares

available as Hot Spares of specific Logical Drives.

[Remove Hot Spare] removes Physical Devices from Hot Spares.

[Make Online] Sets the selected Physical Device to online.

[Make Offline] Sets the selected Physical Device to offline.

[Locate] Goes on (or blinks) the lamp on the slot where the selected Physical Device is installed.

[ON] goes on (or blinks) the lamp.

[OFF] goes off the lamp.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 134 135

No comments

NEC Express5800/R110f-1E User Manual Page 43