Step 4 In step 2/3, specify the number of
Physical Devices used by Logical Drives (or the
number of Physical Devices used for data storage)
and the number of Logical Drives created in the RAID
Controller. If Physical Devices of different interface
types or device type exist, specify the number of
Physical Devices in each type. After the specification,
click [Next].
Step 5 Step 3/3 shows the configuration of the
RAID System to be configured by the Easy
Configuration. To the RAID System according to the
displayed information, click [OK]. To change the
configuration, click [Back].
69
he
w.
Step 6 If you click [OK] in step 3/3, then the
RAID System will be configured. After the Logical
Drives are created and the makings of Hot Spares
are successfully completed, [Completing the "Easy
Configuration" Wizard] appears. Now creating the
Logical Drives and making Hot Spares is completed.
After the wizard is closed, see the Tree View to check
the configuration. However, the Initialize of the
Logical Drives having been created may not be
completed. The progress and result of initializing t
Logical Drives can be checked on the Operation Vie
Comments to this Manuals