NEC Express5800/R110f-1E User Manual download pdf (Page 80)

Step 4 If you click [Add] in the [Create Logical

Drive (Custom)] dialog box, the [Register Logical

Drive] wizard is started. In step 1/3, select the RAID

Level of the Logical Drive to be registered. After the

selection, click [Next].

Step 5 In step 2/3, the operation varies

depending on the RAID Level selected in step 1/3.

(1) When RAID 0, RAID 1, RAID 5, or RAID 6 is

selected as the RAID Level, select an existing Disk

Array or create another Disk Array.

When you select an existing Disk Array, select the

Disk Array on [Disk Array]. If the RAID Controller

contains Physical Devices of different types, click the

type to be used on [Type]. Next, click the Disk Array

node to be used on [Disk Array]. After the selection,

click [Next].

To create a Disk Array to be used newly, click [Add

Disk Array]. Then the [Add Disk Array] dialog box

appears. Check the check boxes of Physical Devices

to be used for the added Disk Array by the number

required for the RAID Level to be created. Then click

[OK]. The newly created Disk Array is added to [Disk

Array] in step 2/3 of the [Register Logical Drive]

wizard.

(2) RA

ID 10 or RAID 50 is select as the RAID Level,

select Physical Devices used for the Logical Drive.

For RAID 10, check the check boxes of four Physic

Devices. For RAID 50, check the check boxes of six or

larger Physical Devices. Further, the number of

Physical Devices should be even and more than 5.

After the selection, click [Next].

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 134 135

No comments

NEC Express5800/R110f-1E User Manual Page 80